Monitor Connector (Managed Components) |
Settings
spBatchSize
Setting Type |
Hot |
Type |
Integer |
Description |
The maximum number of Service Containers that can be started simultaneously. |
spStartUpTime
Setting Type |
Hot |
Type |
Long |
Description |
The maximum timeout allowed for a Service Container to start before accepting another SOAP Processor in the batch.. |
Counters
requestHandlingTimer
Counter type |
Event Value Counter |
Value |
Frequency and duration of the request handling of this application connector |
Hints |
|
Alerts
monitorStartErrorLdapFailure
Severity Level |
Error |
Message |
The Cordys monitor could not be started due to failure to access the LDAP Server. Please ensure that the LDAP server is running. If so, the <machine> could be slow. Add the 'bus.ldaprequest.timeout=<timeout>' property in the wcp.properties file and specify the duration for request time out. |
Description |
This alert is issued when monitor cannot be started because of LDAP connectivity problem. |
processLaunchError
Severity Level |
Error |
Message |
The process {0} could not be launched. |
Description |
This alert is issued when launching of process fails. |
soapProcessorFailure
Severity Level |
Error |
Message |
SOAP Processor {0} has crashed. |
Description |
This alert is issued when soap processor crashes. |
soapProcessorStopped
Severity Level |
Error |
Message |
The SOAP Processor {0} has been stopped. |
Description |
*This alert is issued when soap processor stops. |
soapProcessorStarted
Severity Level |
Info |
Message |
The SOAP Processor {0} has been started. |
Description |
This alert is issued when soap processor started successfully. |
processLaunch
Severity Level |
Info |
Message |
Launching process {0} |
Description |
This alert is issued when a process is in the starting mode. |
processStop
Severity Level |
Info |
Message |
Stopping process {0} |
Description |
This alert is issued when a process is in the stopping mode. |
Problems
There are currently no defined problems for Monitor Connector type.
Sub-components
Currently the Monitor Connector does not have sub-components.